Loading & unloading discs, Loading the vgp-xl1b changer/recorder – Sony VGP-XL1B2 User Manual
Page 30

24
VGP-XL1B User Guide
Loading & Unloading Discs
Loading the VGP-XL1B Changer/Recorder
Before you load discs into the VGP-XL1B Changer/Recorder for
the first time, please do the following:
1 Make sure the Changer/Recorder is properly connected to the host
computer and is turned on.
2 Make sure the system is connected to the Internet and the Internet
connection is working properly.
3 Start Media Center Setup and verify that the correct options were
selected during setup. From the main menu, select
Settings |
General | Media Center Setup | Run Media Center Setup Again
.
4 Select
Yes
when asked, “Do you want Media Center to
automatically connect to the Internet to get this information?”
5 Select
Yes
when asked, “Do you have an always on Internet
connection?”, if this is so.
Once you have completed this procedure, continue with loading
discs into the Changer/Recorder.
To load a single disc
• Press the
Load
button once and insert the disc in the open slot
of the optical drive located on the front panel.
To load multiple discs
• Press the
Load
button twice and insert each disc in the open
slot of the optical drive one at a time. The Changer/Recorder
carousal keeps rotating open slots to the drive until all slots are
filled or until no disc is inserted after 15 seconds.
Note
: When loading discs, make sure that the label is facing to the
right of the slot.
Kansas2.book Page 24 Wednesday, February 1, 2006 8:00 AM