Sony VGP-XL1B2 - Manual (Page 24)

18 VGP-XL1B User Guide
Step 3: Connect the VGP-XL1B to the
Host Computer
Connecting the VGP-XL1B CD/DVD Changer/Recorder to the your
computer is a simple process requiring only a single cable.
1 Using the supplied i.LINK ® cable, connect the end without the
ferrite bead (a large node close to one end of the cable) to an
i.LINK
®
connector on the host computer, and connect the cable
end with the ferrite bead to an i.LINK
®
connector on the back
panel of the VGP-XL1B CD/DVD Changer/Recorder.
2 Turn the power to the host computer on before turning the power
on the VGP-XL1B CD/DVD Changer/Recorder.
To verify that the installation was successful, do one of the
following.
To verify using Device Manager
1 Click Start from the Window taskbar, and then click Control
Panel .
2 Double-click System and select the Hardware tab from the
System Properties dialog box.
3 From the Hardware tab page, select Device Manager . Check for
VGP-XL1B under Medium Changers.
To verify using Media Center
1 Start Media Center.
2 From the Start menu, select More Programs and then look for the
Manage Discs option.
Note : Before you begin, make sure that the power has been
turned off to the host computer and any peripheral equipment.
Kansas2.book Page 18 Wednesday, February 1, 2006 8:00 AM