Sony KD-34XBR960N User Manual
Page 28
27
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ...
Do This ...
Watch cable (unscrambled)
channels
Press
TV/VIDEO
repeatedly to select the cable input (CABLE in the
illustration).
Watch cable box (scrambled)
channels
Press
TV/VIDEO
repeatedly to select the cable box input (VIDEO 3 in the
illustration). Use the cable box to change channels.
Watch the VCR
Press
TV/VIDEO
repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Set up the TV remote control
to operate the cable box or
VCR
If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages 51-52.
Activate the remote control to
operate the cable box or VCR
For the cable box, press
SAT/CABLE FUNCTION
. For the VCR, open the outside
cover, as shown on page 50. Then set the A/V slide switch to the position
you programmed for the VCR.
Control specific cable box and
VCR functions with the TV
remote control
See “Operating a Cable Box” on page 67 and “Operating a VCR” on page 66.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on page 101.
CATV
Coaxial
cable
A/V cable
cable
Splitter
(not supplied)
Coaxial
cable
TV
Cable box
VCR
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
A/V cable
Coaxial
cable
34XBR.book Page 27 Thursday, May 20, 2004 7:09 AM