Sony MZ-R500 - Manual (Page 20)

20
-GB
Checking the remaining
time or the recording
position
You can check the remaining time, track
number, etc. when recording or during
stop.
1
While the recorder is recording or
stopped, press ENTER, press
>MENU. repeatedly until
“DISP” flashes in the display, and
then press ENTER again.
2
Press >MENU. repeatedly
until the information you want flashes
in the display.
Each time you press MENU
., the
display changes as follows.
LapTim (elapsed time)
r
RecRem (remaining time for
recording)
1)
r
AllRem (remaining time after
the current location)
2)
1) “REC REMAIN” start flashing in the display
when the remaining time for recording
become 3 minutes or less.
2) Appears only when the recorder is stopped.
3
Press ENTER.
The display changes as follows.
z
If you want to check the playing position or
track name while playing, see page 23.
>MENU.
ENTER
A B
Elapsed time Track number
Remaining time for
recording Track name 1)
1) Appears only if the track has been labeled.
Remaining time
after the current
location Disc name 1)
A B