Handycam" user guide – Sony HDR-PJ200 User Manual
Page 191
Search
Saving images with an external
device
Top page > Maintenance and precautions > About handling of your camcorder > On adjustment of the
touch panel (HDR-CX200/CX210/PJ200)
On adjustment of the touch panel (HDR-CX200/CX210/PJ200)
The buttons on the touch panel may not work correctly. If this happens, follow the procedure below. It is
recommended that you connect your camcorder to the wall outlet (wall socket) using the supplied AC
Adaptor during the operation.
1.
[Setup]
[ General Settings]
[Calibration].
2. Touch “
” displayed on the screen with the corner of memory card or the like 3 times.
Touch [Cancel] to cancel calibration.
Notes
If you did not press the right spot, try the calibration again.
Do not use a sharp-pointed object for calibration. Doing so may damage the LCD screen.
You cannot calibrate the LCD screen if it is rotated, or closed with the screen facing out.
Copyright 2012 Sony Corporation
184