Sony DCM-M1 - Manual (Page 52)

52
(4) Play the track to be repeated.
A of AB flashes.
(5) Press the control dial at the point to start repeating.
Starting point (A) is set and B flashes.
(6) Press the control dial at the point to finish repeating.
Finishing point (B) is set. The portion from A to B is repeated.
To stop repeating
Set PLAY MODE to NORMAL.
To operate the menu
You may use the control dial.
Notes on setting the A-B repeat
• You can set the A and B points by touching AB
with the input pen.
• A-B repeat is possible only with movie tracks. If you select other type of track, AB
appears, but it cannot be set.
• A-B repeat is possible only within one track. You cannot set A in one track and B in
another track.
• A-B repeat is possible with a movie track in a group track.
• If the interval between A and B is shorter than 0.5 second, your camcorder
automatically adjust the interval to 0.5 second.
To cancel A and B points
• Press the control dial. Your camcorder plays from the beginning of the track.
• Stop playback.
Playing back repeatedly
B A