Sony DCM-M1 - Manual (Page 14)

14
Step 1 Preparing the power supply
Installing the battery pack
Install the battery pack to use your camcorder outdoors.
(1) Slide OPEN (BATT) down to open the battery compartment lid.
(2) With the V mark pointing down, insert the battery pack until it clicks.
(3) Shut the lid.
To remove the battery pack
Open the lid and push the catch.
Note
Put your hand by the battery compartment lid to prevent the battery pack from
dropping.
Remaining battery time indicator of the camcorder
•Approximate time remaining for continuous recording will be displayed on the LCD
screen or in the viewfinder. The time may not be correct depending on the condition
or environment the camcorder is used.
•It will take about 1 minute for the camcorder to display a correct remaining time when
you open or close the LCD screen.
•The remaining time displayed on the camcorder may differ from that on the AC
adaptor/charger.
2 1 3
Catch