Sony PEG-UX40 - Manual (Page 93)

Customizing your CLIÉ™ handheld (Preferences) 93
Setting the Network preferences for your provider and dial-up server
6
Repeat step 4 until the log-in script is complete.
7
Tap [OK].
The Details screen is displayed.
8
Tap [OK].
The Preferences screen for Network is displayed.
Wait For Makes your CLIÉ handheld wait for specific characters
from the TCP/IP server before executing the next
command.
Wait For Prompt Detects a challenge-response prompt coming from the
server and displays the dynamically generated challenge
value. Then enter the challenge value into your token
card, which in turn generates a response value for you to
enter on your CLIÉ handheld. This command takes two
arguments, separated by a vertical bar (|) on the input line.
Send Transmits specific characters to the TCP/IP server to
which you are connecting.
Send CR Transmits a carriage return or LF character to the TCP/IP
server to which you are connecting.
Send User ID Transmits the User ID information entered in the User
ID field of the Preferences screen for Network.
Send Password Transmits the password entered in the Password field
of the Preferences screen for Network. If you did not
enter a password, this command prompts you to enter
one. The Password command is usually followed by a
Send CR command.
Delay Makes your CLIÉ handheld wait a specific number of
seconds before executing the next command in the log-in
script.
Get IP Reads an IP address and uses it as the IP address for your
CLIÉ handheld. This command is used with SLIP
connections.
Prompt Opens a dialog box and prompts you to enter text (for
example, a password or a security code).
End Identifies the last line in the log-in script.
Continued on next page
• • • • • • • • • • • • • • • • • • •