Sony DCR-PC105 - Manual (Page 42)

42
You can monitor a tape recording on the LCD screen. If you close the LCD panel, you
can monitor the playback picture in the viewfinder. You can also control playback using
the Remote Commander supplied with your camcorder.
(1) Set the POWER switch to VCR while pressing the small green button.
(2) Press OPEN to open the LCD panel.
(3) Press
to rewind the tape.
(4) Press to start playback.
(5) Adjust the volume following the steps below.
1 Press FN to display PAGE1.
2 Press VOL. The screen to adjust volume appears.
3 Press – (to turn down the volume)/+ (to turn up the volume).
4 Press OK to return to PAGE1.
— Playback – Basics —
Playing back a tape
4 3 1
5
2
VOL
OK
LOCK
MEMORY CAMERA
VCR
(CHG)OFF
POWER
The bar indicator