Sony DCR-PC105 - Manual (Page 110)

110
The label can consist of up to 10 characters and is stored in Cassette Memory. When you
set the POWER switch to CAMERA and insert a labeled cassette, or when you set the
POWER switch to VCR, the label is displayed for about 5 seconds.
The POWER switch should be set to or .
Operate by touching the panel.
(1) Insert a cassette with Cassette Memory you want to label.
(2) Press FN to display PAGE1.
(3) Press MENU.
(4) Select TAPE TITLE in
, then press EXEC. The screen to label a cassette
appears.
(5) Select the desired character. Repeat pressing a key to select the desired
character on the key.
(6) Press c to move the cursor to select the next character. Repeat the same
procedure as steps 5 and 6 to complete the label.
(7) Press SET. The label is stored in memory.
To return to FN
Press EXIT.
To erase the label you have made
Erase the label by selecting C in step 5, then press SET.
To change the label you have made
Insert the cassette to change the label, and operate in the same way to make a new label.
If you have superimposed titles in the cassette
When the label appears, up to 4 titles also appear.
To erase the character
Press C. The last character is erased.
To enter a space
Press c.
Labeling a cassette with Cassette
Memory
4 5 6
&? ! ABC DEF T t
678
90
123
45
MNO JKL GH I
SET ’ . ,
/ –
WXY
Z
TUV PQR
S
[ G_ _ _ _ _ _ _ _ _ ]
EXIT TAPE TITLE
&? ! ABC DEF T t
678
90
123
45
MNO JKL GH I
SET ’ . ,
/ –
WXY
Z
TUV PQR
S
[ GRADU_ _ _ _ _ ]
EXIT TAPE TITLE
&? ! ABC DEF T t
678
90
123
45
MNO JKL GH I
SET ’ . ,
/ –
WXY
Z
TUV PQR
S
[ _ _ _ _ _ _ _ _ _ _ ]
EXIT TAPE TITLE