Sony DCR-PC105 - Manual (Page 127)

127
“
Memory Stick
”
Operations
Recording an image from a tape as a still image
Recording a still image from other equipment
You can use either A/V connecting cable or i.LINK cable. See page 97 for the
connection.
When connecting with the A/V connecting cable, set DISPLAY in
to LCD in the
menu settings. (The default setting is LCD.)
Also, select the video jack for connection (p. 98).
The POWER switch should be set to .
(1) Play back the recorded tape on the VCR, or turn the TV on to see a desired
program.
The image of the other equipment is displayed on the LCD screen or in the
viewfinder.
(2) At the point where you want to record, follow steps 2 and 3 on page 126.
Note
If the tape is in poor condition due to being used repeatedly for dubbing and so on,
your camcorder may not be able to record the image, or the recorded image may appear
jagged.