Asus DSEB-D16 - Manual (Page 92)

4-20 Chapter 4: BIOS setup
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
PCI/PnP Configuration
Reset Configuration Data [No]
Plug & Play O/S [No]
Palette Snooping [Disabled]
Onboard LAN1 Configuration
Onboard LAN2 Configuration
Onboard LAN3 Configuration
Onboard LAN4 Configuration
PCI-Express Slot 1 Configuration
PCI-Express Slot 2 Configuration
PCI-Express Slot 3 Configuration
PCI-X Slot 4 Configuration
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
4.4.3 PCI/PnP Configuration
The PCI/PnP Configuration menu items allow you to change the advanced settings
for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources
for either PCI/PnP or legacy ISA devices, and setting the memory size block for
legacy ISA devices.
Take caution when changing the settings of the PCI/PnP Configuration menu
items. Incorrect field values can cause the system to malfunction.
Reset Configuration Data [No]
Clears the non-volatile RAM (NVRAM) during boot.
Configuration options: [No] [Yes]
Plug And Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Configuration options: [Disabled] [Enabled]
Clear ESCD during
System Boot.