12 chapter 5: raid configuration – Asus DSEB-D16 User Manual

Page 122

5-12

Chapter 5: RAID configuration

Press again, the logical drive information appears including a Logical

Drive menu that allows you to change the logical drive parameters.

6. Select RAID from the Logical Drive menu, then press .
7. Select RAID 10 from the menu, then press .

You need at least four identical hard disk drives when creating a RAID 10 set.

8. Select DWC from the Logical Drive menu, then press .
9. Select On to enable the Disk Write Cache setting, then press .

LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007

Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option

Management Menu

Configure

Initialize

Objects

Rebuild

Check Consistency

PORT #

DNLIN A00-00

DNLIN A00-01

0
1

Easy Configuration - ARRAY SELECTION MENU

Logical Drive(s) Configured

LD RAID Size #Stripes StripSz Status

0 0 308988MB 4 64 KB ONLINE

Logical Drive 0

RAID = 0

Size = 308988MB

DWC = Off

RA = On

Accept

SPAN = NO

Choose RAID Level For This VD

RAID = 0

RAID 5

RAID 10

RAID Level