beautypg.com

Asus DSEB-D16 User Manual

Page 46

background image

2-26

Chapter 2: Hardware information

5. Connect the fan cable to the

4-pin connector labeled FBD_FAN1.

4. Position top cover over the fan

base. Insert the top cover legs into

the slot on the fan base legs.

Push down carefully until the legs

are securely in place and the top

cover hooks snap in place.

Make sure the cables pass

through the notch on the fan base

as shown.

6. Repeat the previous instructions to install the other FB-DIMM fan if needed.

This manual is related to the following products: