beautypg.com

Shooting still images, Viewing still images, Shooting movies – Sony DSC-T33 User Manual

Page 18

background image

18

DSC-T3/T33 2-548-269-11(1) [OpenType FONT]

Number of images and battery

life that can be recorded/

viewed

The tables show the approximate number
of images and the battery life that can be
recorded/viewed when you shoot images in
normal mode with a fully charged battery
pack (supplied) at a temperature of 25°C
(77°F). The numbers of images that can
be recorded or viewed take into account
changing the “Memory Stick Duo” as
necessary. Note that the actual numbers
may be less than indicated depending on
the conditions of use.

• The battery capacity decreases as the number

of uses increases and over time (page 131).

Shooting still images

Under the average conditions

1)

Image

size

NP-FT1 (supplied)
LCD

backlight

No. of

images

Battery

life (min.)

5M

On

Approx.
180

Approx.
90

Off

Approx.
210

Approx.
105

VGA
(E-Mail)

On

Approx.
180

Approx.
90

Off

Approx.
210

Approx.
105

1)

Shooting in the following situations:

(P.Quality) is set to [Fine]

– Shooting one time every 30 seconds
– The zoom is switched alternately between

the W and T ends

– The flash strobes once every two times
– The power turns on and off once every ten

times

– [AF Mode] is set to [Single] on the Setup

screen

The measurement method is based on CIPA

standard. (CIPA: Camera & Imaging Products
Association)

Viewing still images

2)

Image

size

NP-FT1 (supplied)
No. of

images

Battery life

(min.)

5M

Approx. 3800 Approx. 180

VGA
(E-Mail)

Approx. 3800 Approx. 180

2)

Viewing single images in order at about three

second intervals

Shooting movies

3)

NP-FT1 (supplied)
LCD backlight

On

LCD backlight

Off

Approx. 80 min.

Approx. 100 min.

3)

Shooting movies continuously with the image

size [160]

• The number of images and the battery life that

can be recorded/viewed are decreased under
the following conditions:
– The surrounding temperature is low
– The flash is used
– The camera has been turned on and off many

times

– The zoom is used frequently
– [LCD Backlight] is set to [Bright] on the

Setup screen

– [AF Mode] is set to [Monitor] on the Setup

screen

– The battery power is low