Sony PEG-NX60 - Manual (Page 28)

28
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
You cannot input properly
When you tap the button or screen icons, your CLIÉ
handheld activates the wrong feature
B The digitizer is not correctly calibrated.
Set the digitizer on Preferences - Digitizer .
b For details, refer to “Customizing your Sony CLIÉ Handheld (Preferences):
Adjusting the digitizer” in “Handbook.”
B Your CLIÉ handheld may not be able to recognize your tapping properly
if there is a liquid crystal protection sheet attached to the screen.
When you tap the menu icon, the menu is not displayed
B Some applications or screens do not have the menu feature. Retry with
another application.
Your CLIÉ handheld does not recognize handwritten
characters
B For your CLIÉ handheld to recognize handwritten characters input with the
stylus, you must use Graffiti
®
writing.
b For details, refer to “Entering data in your Sony CLIÉ™ Handheld: Using
Graffiti
®
writing to enter data” in “Handbook.”
B Enter the Graffiti strokes in the Graffiti writing area, not on the display part
of the screen.
B Enter Graffiti strokes for letters on the left-hand side of the Graffiti writing
area, and the strokes for numbers on the right-hand side of the same area.
B Make sure that Graffiti has not shifted into extended or punctuation modes.
b For details, refer to “Entering data in your Sony CLIÉ™ Handheld: Using
Graffiti
®
writing to enter data” in “Handbook.”
B How to enter Graffiti characters faster and accurately.
b For details, refer to “Entering data in your Sony CLIÉ™ Handheld: Using
Graffiti
®
writing to enter data” in “Handbook.”