Auto hdr – Sony NEX-3N User Manual
Page 92
92
GB
Ta
ble
of
Sa
mp
le
Me
nu
In
Widens the range (gradations) so that you can record from bright parts to dark parts in
correct brightness (HDR: High Dynamic Range). 1 image with proper exposure and 1
overlaid image are recorded.
1 MENU t [Brightness/Color] t [DRO/Auto HDR] t [Auto HDR].
2 OPTION t desired value.
• You cannot start the next shoot until the capture process is fully completed.
• You cannot use this function with [RAW] and [RAW & JPEG] images.
• Since the shutter is released 3 times for a single shot, be cautious of the following:
– Use this function when the subject is motionless or does not blink.
– Do not change the composition before shooting.
• You may not obtain a desired effect depending on the luminance difference of a subject and the shooting
conditions.
• When the flash is used, this function has little effect.
• When the contrast of the scene is low or when significant camera-shake or subject blur has occurred, you
may not be able to obtain good HDR images. If the camera detects such situation,
is displayed on
the recorded image to inform you of this situation. If necessary, change the composition or otherwise
adjust the settings, be careful of blurring, and shoot again.
Auto HDR
(Auto HDR:
Exposure Diff.
Auto)
Corrects the exposure difference automatically.
1.0 EV – 6.0 EV
Sets the exposure difference, based on the contrast of the subject.
Select the optimal level between 1.0 EV (weak) and 6.0 EV
(strong).
Notes