Sony PCG-FX120K - Manual (Page 61)

Connecting to the Local Area Network (LAN)
61
Connecting to the Local Area Network (LAN)
You can connect your computer to 10BASE-T and 100BASE-TX-type networks.
For the detailed settings and devices needed to connect to the network, ask your
network administrator.
Setting Up Your Ethernet Connection
Windows Me™ models
1 Right-click Network Neighborhood and select Properties.
2 Click Add to add a client, adapter, protocol, or service.
3 Click File and Print Sharing to enable these functions.
4 Select a Primary Network Logon.
Connecting to LAN
Warning: Only connect 10BASE-T and 100BASE-TX cables to the (Ethernet
network) port. Do not connect any other type of network cable or any telephone
line. Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
connector. To connect the unit to the network, contact your network
administrator.
Note that if you enable Wake on LAN, the power saving mode will be switched
to Standby mode.
Ethernet
adapter