Sony PCG-FX120K - Manual (Page 95)

Adding Memory
95
3 After the computer has cooled, loosen and remove the screw that secures the
cover of the memory bay on the bottom of your computer. Use an
appropriate screwdriver.
4 Touch a metal object (such as the connector panel on the back of your
computer) to discharge any static electricity.
5 Remove the memory module.
6 Tighten the screw on the memory bay cover.
Removing the memory module cover
Removing memory module
✍
Your computer comes with a memory module installed in the memory slot. To
upgrade your memory, remove this module from the slot before installing your
upgrade memory module.
Screwdriver
Screw
2 Pull the memory module in
the direction of the arrow.
1 Pull the tabs in the direction of the arrows.
The memory module is released.
1
2
1