Avaya P332G-ML - Manual (Page 64)

Chapter 10 Basic Switch Configuration
50 Avaya P332G-ML User’s Guide
System Parameter Configuration
Identifying the system
In order to make a P330 switch easier to identify, you can define a name for the
switch, contact information for the switch technician and the location of the switch
in the organization.
Operating parameters
You can use the following commands to configure and display the mode of
operation for the switch and display key parameters.
In order to... Use the following command...
Configure the system name. set system name
Configure the system contact
person set system contact
Configure the system location set system location
In order to... Use the following command...
Configure the basic mode of
operation of a module to either
Layer 2 or Router set device-mode
Display the mode of operation show device-mode
Display system parameters show system
Display module information for all
modules within the stack show module