Avaya P332G-ML - Manual (Page 40)

Chapter 5 Powering Up the Avaya P330
26 Avaya P332G-ML User’s Guide
Warning: The proper wiring sequence is ground to ground, positive to positive and
negative to negative. Always connect the ground wire first and disconnect it last.
Post-Installation
The following indicate that you have performed the installation procedure
correctly:
If you do not receive the appropriate indication, please refer to "Troubleshooting the
Installation".
Table 5.1 Post-Installation Indications
Procedure Indication
Troubleshooting
Information
Powering the P330 All front panel LEDs illuminate
briefly Page 127
Creating Stacks The LED next to the
appropriate connection (“Cable
to upper unit” or “Cable to
lower unit”) is lit. Page 127