Sony DSLR-A290 - Manual (Page 150)

150
“Memory Stick PRO Duo” media are not recognized by a computer with a
“Memory Stick” media slot.
• If “Memory Stick PRO Duo” media are not supported on your computer’s
“Memory Stick” media slot, connect the camera to the computer
(page 122). The computer will recognize the “Memory Stick PRO Duo”
media.
Also see “PictBridge compliant printer” (as follows) in conjunction with
the following items.
The color of the image is strange.
• When you print the images recorded in Adobe RGB mode using sRGB
printers that are not compatible with Adobe RGB (DCF2.0/Exif2.21), the
images are printed at a lower intensity level (page 88).
Images are printed with both edges cut off.
• Depending on your printer, the left, right, top, and bottom edges of the
image may be cut off. Especially when you print an image shot with the
aspect ratio set to [16:9], the lateral end of the image may be cut off.
• When printing images using your own printer, cancel the trimming or
borderless settings. Consult the printer manufacturer as to whether the
printer provides these functions or not.
• When having images printed at a digital print shop, ask the shop whether
they can print the images without cutting off both edges.
Cannot print images with the date.
• Using “PMB,” you can print images with date (page 133).
• This camera does not have a feature for superimposing dates on images.
However, because the images shot with the camera include information on
the recording date, you can print images with the date superimposed if the
printer or the software can recognize Exif information. For compatibility
with Exif information, consult the manufacturer of the printer or the
software.
• When you print images at a shop, images can be printed with the date if you
ask them to do so.
Printing