beautypg.com

Send by transferjet, Mark (73 – Sony DSC-HX5V User Manual

Page 73

background image

Ta
ble
of

co
nte
n

ts

Op
e

rat

io

n

S

ear

ch

MENU/Settin

g

s

Se
ar

ch

In

de
x

73

GB

Send by TransferJet

TransferJet is a close-up, wireless transfer technology that allows data to be transferred by
closely aligning two products that you want to communicate with each other.
To find out whether your camera is equipped with the TransferJet function, check for the

(TransferJet) mark on the bottom of the camera.
Using Memory Stick with TransferJet (sold separately), you can transfer image data between the
camera and TransferJet-compatible devices.
For more details on TransferJet, see the operating instructions supplied with Memory Stick with
TransferJet.

1 Insert Memory Stick with TransferJet into this camera, then press the

(Playback) button.

2 MENU t

(Send by TransferJet)

t desired mode t z on the control

button

3 Send image data by aligning

(TransferJet) marks on the camera and

other device.

A beep sounds when the connection is successful.

• Only still images can be transferred.
• You can send up to 10 images at a time.
• Set [TransferJet] to [On] in

(Settings) (page 107).

• On an airplane, set [TransferJet] to [Off] in

(Settings) (page 107). In addition, follow the rules of the

place where you use.

• The connection is cut if transfer cannot be made within about 30 seconds. In that case, select [Yes] in the

resending confirmation screen and aligning

(TransferJet) marks on the camera and other device

again.

• In some countries or regions, Memory Stick with TransferJet, or a TransferJet-compatible camera may

not be available, depending on local regulations (active and pending).

• Outside the country or region of purchase, set [TransferJet] to [Off]. In some countries or regions, the use

of TransferJet may be subject to punishment according to local radio wave regulations.

(This Image)

Sends the currently displayed image in single-image mode.

(Multiple

Images)

You can select and send multiple images.
Do as the following after step 2.

1

Select an image then press z.
Repeat the above step until there are no more images to be sent.
Select an image with a

mark to release the

mark.

2

MENU

t [OK] t z

Notes