Sony XAV-70BT - Manual (Page 51)

51
* When a device is connected to BUS CONTROL IN, “Sony BUS Input” appears instead of “AUX2 Input,” and only
options “Video” and “Audio” are selectable.
Item Option Purpose Unit status
Rotary Commander
Changes the operative
direction of rotary commander
controls.
Default (z) To use in the factory-set
position.
Any status.
Reverse To use on the right side of
the steering column.
AUX1 Input (page 56)
Sets the type of device
connected to the AUX1 IN
terminals to switch the
background screen
accordingly.
Video (z) To show the picture from
the connected device.
Unit off.
Audio To show this unit’s
background screen.
OFF To deactivate the AUX
input.
AUX2 Input* (page 56)
Sets the type of device
connected to the AUX2 IN
terminals to switch the
background screen
accordingly.
Video (z) To show the picture from
the connected device.
Unit off.
Audio To show this unit’s
background screen.
OFF To deactivate the AUX
input.
No Signal
Changes the screen
automatically when no
external video signal is
detected.
Through To show the no signal
screen.
Unit off.
Blank (z) To show the audio playback
screen with no signal
notification.
Camera Input
Activates the video input from
the connected rear view
camera.
OFF To deactivate the input.
Any status.
ON (z) To show the picture from
the rear view camera when
the back lamp lights up (or
the shift lever is set to the R
(reverse) position).
Rear View Camera Setting
(page 57) – –
Any status.
Monitor Angle (page 47) – – Any status.