Adjusting the speaker volume, Monitor adjustment, Adjusting the monitor angle – Sony XAV-70BT User Manual
Page 47: Touch panel calibration
47
Adjusting the speaker volume
You can adjust the volume level of each
connected speaker.
The adjustable speakers are “Front R” (Front
Right), “Front L” (Front Left), “Surround L”
(Rear Left), “Surround R” (Rear Right) and
“Subwoofer*.”
* Adjustable only when a subwoofer is connected and
“Subwoofer” is set to “ON” (page 52).
1
While the unit is off, touch “Source
List,” then
.
2
Touch “Sound.”
The sound setting menu appears.
3
Touch v/V to scroll, then “4.1ch
Speaker Level.”
The setting display appears.
4
Touch the speaker, then +/– to adjust
the level.
Repeat this step to adjust all speaker volume.
To restore the default setting, touch “Reset.”
To return to the previous display, touch “Back.”
Monitor Adjustment
Adjusting the monitor angle
You can adjust the monitor angle for best
viewing.
1
Touch “Source List,” then
.
2
Touch “General.”
The general setting menu appears.
3
Touch v/V to scroll, then “Monitor
Angle.”
The setting display appears.
4
Touch –/+ to adjust the angle.
The adjustment is stored.
The monitor retains the angle even after the
front panel is opened and closed.
To return to the previous display, touch “Back.”
Touch panel calibration
Touch panel calibration is required if the
touching position does not correspond with the
proper item.
1
Touch “Source List,” then
.
2
Touch “General.”
The general setting menu appears.
3
Touch v/V to scroll, then “Touch Panel
Adjust.”
The setting display appears.
4
Touch the targets in sequence.
The calibration is complete.
To cancel calibration, touch “Cancel.”
Front L
Surround L
Subwoofer
Front R
Surround R
12:00
ATT
Reset
Back
4.1ch Speaker Level
Top
0