Sony PCG-R505GCK - Manual (Page 49)

Inserting and Ejecting CDs or DVDs
55
4 Press the disc onto the hub until the disc clicks securely into place.
5 Push the drive tray gently to close it. The Busy indicator on the drive blinks
while your computer is reading data from the drive.
To eject a CD or DVD
1 Turn on the computer, and exit a power saving mode (Standby or Hibernate)
if one is active. For more information on power saving modes, see “Using
power saving modes.”
2 Close all software programs that are open from the optical drive, and wait for
the LED indicator to turn off.
3 Press the Eject button on the optical drive cover to open the drive tray. The
drive tray slides out.
4 Lift the disc from the drive.
5 Push the drive tray gently to close it.
Inserting a Disc
If you do not seat the disc firmly over the hub, the disc may come loose
while it is in the drive. A loose disc may damage the optical drive and
make opening the drive tray difficult.
✍
If the Eject button does not work, turn off the computer and insert a thin, straight
object (such as a paper clip) into the manual eject hole next to the Eject button.
Disc (label
facing up)