Sony PCG-R505GCK User Manual
Page 40
VAIO Computer Quick Start
40
5
Type a name in the Profile Name box.
6
In the Tranmission Rate box, make sure Fully Auto is selected. By
selecting Fully Auto, your computer automatically searches for the strongest
(radio) signal.
7
In the ESSID box, type the name of the access point or click Scan to select
an access point.
8
Select a Power Saver option.
9
In the Network Type box, select Infrastructure to connect to or set up a
network to access point (host) connection or click Ad Hoc to connect to or
set up a computer-to-computer connection.
10 If the network was not set up with an encryption key, click Apply.
11 If the network was set up with an encryption key:
1
In the WEP Key box, select 40bit/64 bit for IEEE 802.11b access
points.
2
In the Key format box, select either ASCII mode or HEX mode,
depending on the encryption key.
3
In the Default Key box, select the correct encryption key.
Wireless LAN Card Utility for Windows