Sony PCG-R505GCK User Manual
Page 37
Network Connections
37
accommodates both 10BASE-T and 100BASE-TX Ethernet connections, with
data transfer speeds of between 10 and 100 Mbps, depending on the Ethernet
cable.
To set up an Ethernet LAN
1
Plug one end of the Ethernet cable into your computer’s Ethernet port and
the other into the network connection.
2
Click Start, point to Settings, Control Panel, and click Internet Options.
The Internet Properties dialog box appears.
3
Click to open the Connections tab, and click LAN Settings near the bottom
of the page. The Local Area Network (LAN) Settings dialog box appears.
4
Click to select the Automatically detect settings check box.
5
Click to select the Use automatic configuration script, and type an address
in the Address box.
6
Click OK.
Connecting an Ethernet Cable
Ethernet
cable
Ethernet
port