Your built-in storage device contains the recovery area where the data for system
recovery is stored. If your VAIO computer includes a solid state drive (SSD), you
might want to minimize the recovery area by removing such data to free up disk
space on the C: drive (or the last drive in your drive list, for example D: drive).
You need Recovery Media to remove the data for system recovery or to recover
the computer after you remove the data.
Note that removing recovery content makes it impossible to use the refresh
function.
If you use Recovery Media (optical discs) on the model without a built-in optical
disc drive, connect an external optical disc drive (not supplied) to the computer.
See

Connecting an External Drive

for more information on how to connect the

external optical disc drive.
If an AC adapter or a power cable is supplied, plug it into a power source.

1. Create Recovery Media if you have not yet created it.

See

Creating Recovery Media

for more information on how to create Recovery

Media.

2. Insert the Recovery Media into the optical disc drive or connect a USB flash

drive (not supplied) to the USB port on your VAIO computer while the computer
is in Normal mode.

3. Turn off your VAIO computer.

4. Press the ASSIST button to display the VAIO Care (Rescue Mode) screen

and select Start from media (USB device/optical disc).
Follow the on-screen instructions until the Choose an option screen appears.

5. Select Troubleshoot and VAIO recovery solutions.

Follow the on-screen instructions until the VAIO Care (Rescue Mode): VAIO
recovery solutions screen appears.

6. Select Tools and Remove recovery partition.

7. Follow the on-screen instructions.

Go to Page Top