Sony MZ-S1 - Manual (Page 38)

38
-GB
Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback. Group-related items
appear only when a track with group
settings is played.
1
While the recorder is playing, press
MENU.
2
Press . or > repeatedly until
“DISP” flashes in the display, and
then press ENTER again.
3
Press . or > repeatedly until
the information you want flashes in
the display.
Each time you press >, the display
changes as follows:
Display window on the
recorder
On B
LapTim
The elapsed time of the current
track.
r
1 Rem
The remaining time of the current
track.
r
GP Rem
The remaining time after the current
location in the group.
r
AllRem
The remaining time after the current
location.
4
Press ENTER (ENTER).
The display changes as follows:
The information selected in step 3
appears in A and B.
A
— the information selected in step
3.
B
— track number, track name,
group name, or disc name.
Note
Items may appear differently or may not be
selectable, depending on the group mode’s on/
off status or the recorder’s operating status.
z
If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 34.
MENU/ENTER
Control key
(./>)
A B