Sony ST-SB920 - Manual (Page 7)

Basic Operations
Basic Operations
7 GB
Receiving Preset Stations
This section shows you how to receive preset stations.
1 Make sure you’ve hooked up the tuner and preset stations.
(See pages 4 and 5 for hookups and pages 10 and 11 for
presetting.)
2 Turn on the amplifier and select the TUNER mode.
3 Press U to turn on the tuner.
4 Press SHIFT repeatedly to select A, B, C, or D.
5 Press the preset number you want (1 - 0).
To check broadcasts by scanning the preset stations
TUNE MODE TUNING / SELECT
DIRECT 0
MENU TUNE MODE
RETURN
TUNING / SELECT
ENTER
1
Press TUNE MODE repeatedly so that “PRESET” appears in the display.
2
Turn TUNING/SELECT.
Each time you turn TUNING/SELECT, a preset station is received and
the settings (preset code, frequency, and station name, etc.) appear in the
display. The signal meter indicates the strength of the broadcast signal.
• To tune in a non-preset station,
see “Receiving Broadcasts” on
page 9.
Basic Operations
3
4 5
MEMORY DISPLAY
FM MODE BAND
SHIFT DIRECT 0 9 8 7 6 5 4 3 2 1
MENU TUNE MODE
RETURN
TUNING / SELECT
ENTER