Sony ST-SB920 - Manual (Page 12)

12 GB
Advanced Tuner Operations
Organizing the Preset Stations
This tuner makes it easy to arrange preset stations in
the order you prefer. You can arrange all the preset
stations automatically, according to alphabetical order,
signal strength, or tuner band. You can even erase
specific preset stations.
TUNING / SELECT
5
MENU U
ENTER
MEMORY DISPLAY
FM MODE BAND
SHIFT DIRECT 0 9 8 7 6 5 4 3 2 1
MENU TUNE MODE
RETURN
TUNING / SELECT
ENTER
1
Press MENU.
2
Turn TUNING/SELECT until “SORT” appears in
the display and press ENTER.
“SELECT” appears in the display.
3
Turn TUNING/SELECT to select one of the
following sorting methods:
Select To
ALPHABET sort preset stations in alphabetical order
according to their preset names.
Stations without preset names are arranged
by frequency, from low to high.
STRENGTH sort preset stations in order of their signal
strength (FM stations only).
AM stations are arranged by frequency.
BAND sort preset stations in order of their
frequency band (FM - AM).
4
Press ENTER.
The tuner sorts the stations, then returns to normal
tuning mode and receives preset station A1.
Erasing preset stations
You can erase preset stations one by one.
1 Press MENU.
2
Turn TUNING/SELECT until “CLEAR” appears
and then press ENTER.
3
Turn TUNING/SELECT so that the preset code
you want to erase appears in the display and
press ENTER.
The preset station you selected is erased from the
preset memory.
Note
If you try to select an erased preset station using the SHIFT
button and a numeric button, “65 MHz” (factory-set
frequency) will appear in the display.
z
If you want to erase all the preset stations
1 Turn off the tuner.
2 While pressing down the numeric button 5 and
MENU, press U to turn on the tuner.