Getting started, Getting started fm aerial hookups, Connecting a ground wire – Sony ST-SB920 User Manual
Page 5: Amplifier hookups, Mains lead hookup
5
GB
Getting Started
Getting Started
FM aerial hookups
With an FM outdoor aerial, you can obtain a higher FM
broadcast sound quality. We recommend that you use
the supplied FM wire aerial only temporarily until you
install an FM outdoor aerial. For the specific location
of the FM ANTENNA terminal, see the illustration
below.
FM ANTENNA
What will I need?
• FM wire aerial (supplied) (1)
• FM outdoor aerial (not supplied) (1) and 75-ohm coaxial
cable with IEC female type connector (not supplied) (1)
Connect the supplied FM wire aerial or an FM outdoor aerial
(not supplied) to the FM terminal on the back of this unit.
ANTENNA
FM
AM
y
75
Ω
COAXIAL
ANTENNA
FM
AM
y
75
Ω
COAXIAL
Connecting a ground wire
If you connect an outdoor aerial, be sure to connect a
earth lead (not supplied) to the AM ANTENNA
y
terminal (in addition to the AM loop aerial) for
lightning protection.
IEC female type connector
FM wire aerial
FM outdoor aerial
IEC female type
connector
Amplifier hookups
Connect the tuner to an amplifier. Be sure to turn off
both components before connection. For the specific
location of the terminals, see the illustration below.
LINE OUT
What cables will I need?
• Audio cord (supplied) (1)
Connect the white plugs to the white (L) jacks and the red
plugs to the red (R) jacks. Insert the plugs completely into
the jacks; incomplete connections may cause noise.
ç
TUNER IN
R
L
LINE OUT
R
L
Mains lead hookup
Connect the mains lead to a wall outlet after
completing all of the previous connections.
/
Red (R)
White (L)
White (L)
Red (R)
Amplifier
Tuner
to a wall
outlet