Asus A7V400-MX - Manual (Page 41)

ASUS A7V400-MX motherboard user guide 2-9
2.4 Main menu
System Date [day, mm dd yyyy]
Sets the system to the date that you specify (usually the current date). The format
is month, day, year. Valid values for month, day, and year are Month: (1 to 12),
Day: (1 to 31), Year: (1999 to 2099). Use the key to move between the
month, day, and year fields.
System Time [hh:mm:ss]
Sets the system to the time that you specify (usually the current time). The format
is hour, minute, second. Valid values for hour, minute and second are Hour: (00 to
23), Minute: (00 to 59), Second: (00 to 59). Use the key to move between
the hour, minute, and second fields.
Legacy Diskette A [1.44M, 3.5 in.]
Sets the type of floppy drive installed. Configuration options: [None]
[360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.]
Case Open Warning [Enabled]
Enable this option to activate the chassis intrusion feature of the motherboard.
Configuration options: [Enabled] [Disabled]
Supervisor Password [Clear] / User Password [Clear]
These fields allow you to set passwords. To set a password, highlight the
appropriate field and press . Type in a password then press . You
can type up to eight alphanumeric characters. Symbols and other characters are
ignored. To confirm the password, type the password again and press .
The password is now set to [Set]. This password allows full access to the BIOS
Setup menus. To clear the password, highlight this field and press . When
the same dialog box appear, press . The password is set to [Clear].
System Date Wed, Dec 03 2003
System Time 15 : 30 : 30
Legacy Diskette A: [1.44M, 3.5 in.]
IDE Primary Master [ST321122A]
IDE Primary Slave [ASUS CDS520/A]
IDE Secondary Master [None]
IDE Secondary Slave [None]
Case Open Warning [Enabled]
Supervisor Password Clear
User Password Clear
Security Option [Setup]
Installed Memory 256MB
Halt On [All Errors]
Select Menu
Item Specific Help
Change the day, month,
year and century.
F1 : Help ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults
ESC : Exit →← →← →← →← →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit