Addonics Technologies 1:1 HDD DUPLICATOR PRO-S HDUSI325AES - Manual (Page 14)

Press
ENT
to enter the following screen. Use the Up and Down bu
defaults.
Load Default
Load Default
Ok
If Load Default OK, this will be displayed on the LCD as shown below.
Load Default
Press
ESC
to return to the main menu then use the
ENT
button to select. This function resets all
settings to their factory default. This function helps the system recover from errors caused by an
illegal operation.
10-07.Adv Setup
Load Default
Copy HPA
If this function is set to "ON", the system will completely copy the data in a source HDD's host
protected area.
10-10. Adv Setup
Copy HPA
The default is "OFF". Use the
ENT
, Up and Down buttons to change this to "On".
USB Auto-Link
NOT AVAILABLE
Link Option
NOT AVAILABLE
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/