elektraLite UFO 8 - Manual (Page 7)

18. Cleaning and maintenance.
Now ignoring maintenance and cleaning is very good way of creating problems "down the road" and
many companies and installations do just that. However the net result is, no matter what the fixture,
premature failure!
Changing the oil in a car most people do on a regular basis.
So with the fixtures regular maintenance it an excellent practice, if you want the fixtures to last.
So what is the maintenance for the fixture?
Clean the fan! That’s really it!
Use a small vacuum cleaner and suck the dust and “fur balls” out.
Do not use a can of co². That will just blast the dust and dirt everywhere!
The fan keep the LEDs cool and keep the electronics cool too.
Without the fan working efficiently and dust free, the fixtures will fail and that will be a lot more costly
than having someone vacuum the fixtures on a regular basis.
How often should the fan be cleaned? It depends on where the fixtures are; in a very dusty atmosphere
once a week. So check the fan on a regular basis, it may not need cleaned every week but a quick
“visual inspection” should be done.
The front plastic cover for the lenses should be cleaned so the light output is maintained. Use only a
moist lint-free cloth. Never use alcohol or solvents to clean the fixture.
19. Technical Specification.
 Operating voltage 110 – 250v
 Frequency 50 – 60 Hertz
 200 VI
 Fan cooled
 415mm x 335mm x 470mm
 16.5" x 13.2" x 18.5"
 13 kgs
 29 pounds
 3 watt leds either 8 all white or 2 each Red, green, Blue & White.
 Fuse is 5amp 250v 5 x 20mm
ElektraLite LED pro line is a division of Group One. Group One and its divisions are constantly
improving their product range and we reserve the right to make changes without prior notice.