elektraLite MM 150 - Manual (Page 2)

-
１ -
For your own safety, please read this user manual carefully before installing MM150.
Every person involved with the installation, operation and maintenance of MM150 has to:
-be qualified
-follow carefully the instructions of this manual
Introduction :
Thank you for choosing MM150.
When you unpack MM150, there should be in the box the fixture, a power cable, a DMX
XLR cable, a safety cable and a CD. Please check carefully that there is no damage caused in shipping. If you
notice any damage then immediately let your shipper know and the dealer from whom you purchased MM150.
Features:
operation mode is by DMX 512 utilizing (8 channels) or stand alone or sound activation.
pan and tilt movement :
8 bit resolution for smooth and precise motion
pan : 156° rotation / tilt : 90° rotation
speed of pan/tilt movement adjustable
strobe/shutter : high speed dual-blade shutter, 0-15Hz or random strobe
dimmer : mechanical adjustable from 0% to 100%
colors : 1 color wheel with 9 dichroic filters plus white, with rainbow effect
gobos : 1 rotating gobo wheels, The wheel consist of 7 adjustable rotating gobos plus open, The wheel has
ability to also shake the gobos.
auto-program: 8 preprograms can be selected
display: can be inverted (180)° when MM150 is hung upside down.
local or remote resetting of motors
auto test for all functions
value of each DMX-channel can be displayed
editable program:
edit and save a program to the on board processor using either the controls on the front panel or using an
external controller like an Elektralite CP-20. A maximum 48 scenes/cues/looks can be saved on board. The
resultant saved program can be played back from the “run” menu accessed from the front display panel