A.J. Antunes & Co WD-20D 9400171 - Manual (Page 2)

2 P/N 1011152 Rev. A 03/12
Service/Technical
Assistance
If you experience any problems with the
installation or operation of your unit, contact
your local Roundup Authorized Service Agency.
Fill in the information below and have it
handy when calling your Authorized Service
Agency for assistance. The serial number is on
the specification plate located on the rear of
the unit.
Use only genuine Roundup replacement parts
in this unit. Use of replacement parts other
than those supplied by the manufacturer will
void the warranty. Your Authorized Service
Agency has been factory trained and has a
complete supply of parts for this unit.
To locate your nearest Authorized Service
Agency, visit www.ajantunes.com or contact
the factory at 1-630-784-1000.
Refer to the service agency directory packaged
with your manual and fill in the information
below.
General
The Roundup Warmer Display is designed to
warm and hold bread products at ready-to-
serve temperatures. The unit features easily
adjustable controls that allow you to tailor the
temperature required for your bread product.
The Warmer Display is designed to be used
separately, stacked, or fit under the Roundup
Hot Dog Corral.
This manual provides the safety, installation,
and operating procedures for the unit. We
recommend that all information contained in
this manual be read prior to installation and
operation.
This unit is manufactured from the finest
materials available and is assembled to
Roundup’s strict quality standards. It has been
tested at the factory to ensure dependable
trouble-free operation.
Warranty Information
Please read the full text of the Limited
Warranty in this manual.
If the unit arrives damaged, contact the carrier
immediately and file a damage claim with
them. Save all packing materials when filing a
claim. Freight damage claims are the respon-
sibility of the purchaser and are not covered
under warranty.
The warranty does not extend to:
• Damages caused in shipment or dam-
age as result of improper use.
• Installation of electrical service.
• Normal maintenance as outlined in
this manual.
• Malfunction resulting from improper
maintenance.
• Damage caused by abuse or careless
handling.
• Damage from moisture into electrical
components.
• Damage from tampering with, removal
of, or changing any preset control or
safety device.
General .................................................. 2
Warranty Information ............................. 2
Service/Technical Assistance ................... 2
Important Safety Information ................. 3
Warnings ................................................ 3
Specifications ......................................... 4
Installation ............................................. 5
Operation ............................................... 5
Hi-Limit Reset Button ............................. 5
Maintenance Schedule ........................... 5
Replacing Components .......................... 5
Troubleshooting...................................... 6
Wiring Diagram ...................................... 6
Replacement Parts .................................. 7
Limited Warranty .................................... 8
Table of Contents
Purchased From
Date of Purchase
Authorized Service Agency
Model Number
Name
Serial Number
Phone Number
Manufacturing Number
Address
IMportaNt
A.J. Antunes & Co. reserves the right
to change specifications and product
design without notice. Such revisions do
not entitle the buyer to corresponding
changes, improvements, additions or
replacements for previously purchased
equipment.
IMportaNt
Keep these instructions for future ref-
erence. If the unit changes ownership,
be sure this manual accompanies the
equipment.