How to replace a battery module, How to replace a power distribution module – APC SYMMETRA PDUM160H-B User Manual
Page 25
Maintenance: Parts Replacement
990-3015-001
Symmetra PX 160 kW 400 V Operation
19
How to replace a battery module
.
Holding the handle, gently lift the battery unit and pull it halfway out. A lock mechanism prevents it
from being pulled all the way out.
Release the lock by pushing the battery unit upwards and pull the battery unit all the way out while
supporting it
Take the replacement battery unit and push it into the system.
Note: Allow for a 24-hour recharging period of the batteries after system start-up/battery
replacement for battery monitoring data to become fully reliable.
How to replace a power distribution module
Disconnect the power cable from the power distribution module from the extension cable.
Open the locking latch on the module and gently pull it out of the enclosure.
Reverse the procedure to install the new module.
Use two people to lift components weighing between 18–32 kg/40–70 lb.