Nikon D1X - Manual (Page 5)

vi
Do not drop
The camera and lens ma y malfunction if subjected to strong shocks or vibration.
Keep dry
This product is not waterproof, and may malfunction if immersed in water or exposed to high
levels of humidity. Rusting of the internal mechanism can cause ir reparable damage.
Avoid sudden changes in temperature
Sudden changes in temper ature, such as occur when entering or leaving a heated building on a
cold day, can cause condensation inside the device. To prevent condensation, place the device
in its car rying case or a plastic bag before exposing it to sudden changes in temperature.
Keep away from strong magnetic fields
Do not use or store this device in the vicinity of equipment that generates strong electromag-
netic radiation or magnetic fields. Strong static charges or the magnetic fields produced by
equipment such as radio transmitters could interfere with the monitor, damage data stored on
the memory card, or affect the product’s internal circuitry.
Do not touch the shutter curtain
The shutter cur tain is constructed of extremely thin material that is easily damaged. Under no
circumstances should you exert pressure on the cur tain, poke it with cleaning tools or other
implements, or subject it to powerful air currents from a blower. These actions could scratch,
deform, or tear the curtain.
Cleaning
• When cleaning the camera body, use a blower to remove dust and lint, then wipe gently with
a soft, dry cloth. After using your camera at the beach or seaside, wipe off any sand or salt
using a cloth lightly dampened with pure water and then dr y your camera thoroughly. In rare
instances, static electricity produced by a brush or cloth may cause the LCD displays to light
up or darken. This does not indicate a malfunction, and the display will shortly return to
normal.
• When cleaning the lens and mirror, remember that these elements are easily damaged. Dust
and lint should be gently removed with a blower. When using an aerosol blower, keep the
can vertical (tilting the can could result in liquid being sprayed on the mir ror). If you do get
a fingerprint or other stain on the lens, apply a small amount of lens cleaner to a soft cloth
and wipe the lens carefully.
• See “Technical Notes: Caring for Your Camera” for information on cleaning the low-pass
filter.
Storage
• To prevent mold or mildew, store the camera in a dry, well-ventilated area. If you will not be
using the product for a long period of time, remove the battery to prevent leakage and store
the camera in a plastic bag containing a desiccant. Do not, however, store the camera case
in a plastic bag, as this may cause the material to deter iorate. Note that desiccant gradually
loses its capacity to absorb moisture and should be replaced at regular intervals.
Caring for the Camera and Battery