Nikon D5200 - Manual (Page 90)

73
Multiple Exposure
Follow the steps below to record a series of two or three exposures in a single
photograph. Multiple exposures produce colors noticeably superior to those in
software-generated photographic overlays created from existing images.
❚❚Creating a Multiple Exposure
Multiple exposures can not be recorded in live view. Exit live view before proceeding.
Note that at default settings, shooting will end and a multiple exposure will be
recorded automatically if no operations are performed for about 30 s.
1
Select Multiple exposure.
Press the G button to display the menus.
Highlight Multiple exposure in the
shooting menu and press
2.
2
Enable multiple exposure mode.
Highlight Multiple exposure mode and
press
2.
The options shown at right will be displayed.
Highlight On and press
J.
A
Extended Recording Times
For an interval between exposures of more than 30 s, extend the meter-off delay Custom
Setting c2 (Auto off timers) > Standby timer (
0 160). The maximum interval between
exposures is about 30 s longer than the option selected for Custom Setting c2. If no
operations are performed for approximately 30 s after the monitor has turned off during
playback or menu operations, shooting will end and a multiple exposure will be created
from the exposures that have been recorded to that point.
G button