Nikon D5200 - Manual (Page 227)

210
* The WR-R10 wireless remote controller can not be attached at the same time as a WU-1a
wireless mobile adapter or ME-1 stereo microphone. Attempting to forcibly attach
accessories can damage the camera or accessory.
Remote
controls/
wireless
remote
controller
• Wireless Remote Control ML-L3 ( 0 31): The ML-L3 uses a 3 V CR2025 battery.
Pressing the battery-chamber latch to the right (q), insert a fingernail into the
gap and open the battery chamber (w). Ensure that the battery is inserted in
the correct orientation (r).
• Wireless Remote Controller WR-R10 * /WR-T10 : When a WR-R10 wireless remote
controller is attached, the camera can be controlled wirelessly using a WR-T10
wireless remote controller (
0 32, 175).
Insert a fingernail into the gap behind the battery-chamber latch and open the
battery chamber (q). Ensure that the battery is inserted in the correct
orientation (e).
Microphones Stereo Microphone ME-1 ( 0 104) *
Accessory
terminal
accessories
The D5200 is equipped with an accessory terminal for
WR-R10 wireless remote controllers
( 0 175), MC-DC2 remote
cords ( 0 60), and GP-1 GPS units (0 175), which connect
with the 4 mark on the connector aligned with the 2
next to the accessory terminal (close the connector
cover when the terminal is not in use).
USB and A/V
connector
accessories • UC-E17 and UC-E6 USB cables ( 0 134)
• Wireless Mobile Adapter WU-1a * : Supports two-way communication between the
camera and smart devices running the Wireless Mobile Adapter Utility.