Nikon P80 - Manual (Page 121)

107
Shooting Options: The Shooting Menu
Sh
ooti
n
g
, Pl
ay
bac
k an
d
S
etup
M
enus
ISO sensitivity
When
ISO sensitivity is set to 3200 or 6400, Image size cannot be set to
M 3648×2736, E 3264×2448, D 2592×1944, I 3648×2432, G 3584×2016,
and H
2736×2736. At these image size settings, selecting 3200 or 6400 for ISO
sensitivity automatically switches the Image size setting to C 2048×1536.
When any option other than
3200 or 6400 is next selected for ISO sensitivity, the
original image size setting is restored.
At an
ISO sensitivity setting of 3200 or 6400, the Multi-shot 16 option of the
continuous shooting mode is not available. At a
Continuous setting of Multi-shot
16, selecting 3200 or 6400 for ISO sensitivity switches the Continuous setting
to
Single. The Continuous setting does not change even when ISO sensitivity is
set to options other than
3200 or 6400.
Continuous
Selecting an option other than
Single for Continuous turns Auto bracketing off.
Selecting
Multi-shot 16 changes image quality setting to b Normal and image
size setting to D
2592×1944.
When
Continuous, BSS, or Multi-shot 16 is selected, noise reduction will not be
performed regardless of whether
Noise reduction is set to Auto.
Auto bracketing
When
Auto bracketing is enabled, Continuous will be set to Single and the flash
mode will be disabled (W).
AF area mode
When
AF area mode is set to Center while Metering is set to Spot AF area, the
Metering setting will automatically change to Matrix. When a setting other than
Center is next selected for AF area mode, the Metering setting automatically
reverts back to
Spot AF area.
Noise reduction
When
Auto of Noise reduction is applied with Continuous set to an option other
than
Single or Intvl timer shooting, or with Auto bracketing set to an option
other than
Off, noise reduction will not be performed. Selecting On for Noise
reduction changes Continuous to Single, when an option other than Intvl timer
shooting is selected for Continuous, and Auto bracketing to Off.
Distortion control
When
Distortion control is set to Auto, Continuous is automatically set to
Single and Auto bracketing is set to Off.
Even when the
Distortion control option is disabled, the Continuous and Auto
bracketing settings do not change.