Nikon FJ-CP1 S5 - Manual (Page 13)

4
Follow these steps when using the FJ-CP1:
Using the FJ-CP1 Using the FJ-CP1
Overview
Insert the Camera Insert the Camera (( 8–11) 8–11)
5. Close the
case
4. Perform a fi nal check
3. Insert
desiccant
2. Insert the
camera
1. Ready the camera
Check for Leaks Check for Leaks (( 6–7) 6–7)
If water enters the case, check the seal and
make sure that the case is fully closed (
10).
To prevent water damage to the camera, be
sure to check for leaks before placing the
camera in the case.
Important!
Introduction