Nikon Super Coolscan LS-5000 - Coolscan V - Manual (Page 68)

59
Problem Solution
Additional perforations along one edge of fi lm. Insert fi lm in direction shown.
Film is more than six frames long. Cut fi lm into lengths of two to six frames (cut fi lm
straight across, being careful not to cut across per-
forations), or use optional SA-30 roll fi lm adapter
(available for 5000 ED only;
48).
Use optional FH-3 fi lm holder ( 50).
Film is only one frame long.
Film is curled.
6 mm or more
30 mm
or less
Perforations are torn or missing.