Nikon P7700 - Manual (Page 69)

51
A, B, C, D Modes (Setting the Exposure for Shooting)
Shoot
ing Features
B
Notes on Shooting
• When zooming is performed after the exposure is set, exposure combinations or aperture value
may be changed.
• When the subject is too dark or too bright, it may not be possible to obtain the appropriate
exposure. In such cases, the shutter speed indicator or aperture value indicator flashes when the
shutter-release button is pressed halfway (except when the
D mode is used). Change the shutter
speed setting or aperture value. When settings such as Built-in ND filter ( A72) or ISO
sensitivity ( A68) are changed, the appropriate exposure may be obtained.
B
Note on ISO Sensitivity
When ISO sensitivity ( A68) is set to Auto (default setting), ISO 80-200, ISO 80-400 or ISO 80-
800, the ISO sensitivity in D mode is fixed at ISO 80.
C
Control Range of the Shutter Speed
The control range differs depending on the aperture value, ISO sensitivity or continuous shooting
setting. See “The Control Range of the Shutter Speed“ (
A82) for more information.
C
More Information
See “Customize command dials” ( A112) for more information.
Changing
A, B, C, D Modes
• Features That Can Be Set Using the Multi Selector
➝ A55
• Exposure Compensation
➝ A66
• Features That Can Be Set Using the Quick Menu Dial
➝ A67
• Features That Can Be Set Using the
d (Menu) Button
- Shooting menu
➝ A71
- Setup menu
➝ A110