Nikon P3 - Manual (Page 123)

121
Wi
rel
e
ss Tran
sfer M
o
d
e
Transferring Images to a Computer
Using Wireless Transfer Mode
Wirelessly transfer images to a computer or print images using the functions below.
Sound Settings
When using Wireless transfer mode, all sounds are turned off regardless of the sound settings
(P.105).
Mode Dial Use During Wireless Connection
Rotating the mode dial disconnects the connection and stops image transfer.
Note on Standby Mode
If no operations are performed for approximately three minutes, the camera will enter Standby
mode and the monitor will turn off automatically. During Standby mode, image transfer will still
continue.
Memory Card Write Protection
When the memory card switch is in the “lock” position, images cannot be transferred (except dur-
ing PC Mode). Slide the switch to the “write” position before transferring images (P.21).
Easy Transfer
Transfer images in the internal memory or on the memory
card not already in the computer.
P.124
Shooting Date Transfer images taken on a specific recording date. P.125
Marked Images
Transfer only those images with a transfer mark (E)
(P.95).
P.126
Selected Images Transfer only selected images. P.127
Shoot & Transfer
Transfer recorded images immediately. Images can also be
stored in the internal memory or on the memory card.
P.128
PC Mode
Transfer images to a profile device using a computer with
PictureProject.
P.129
Wireless Printing
Print images from a printer connected to a computer. P.130
Using the optional PD-10 wireless printer adapter, you can
print by wirelessly transferring images to a PictBridge-com-
patible printer.
P.131