Nikon S5100 - Manual (Page 127)

115
Connecting to a Printer
Co
nne
ct
in
g t
o
Te
le
vi
sio
n
s, Comp
u
te
rs
, a
n
d
Pr
in
te
rs
Connecting the Camera to a Printer
1
Turn off the camera.
2
Turn on the printer.
Check printer settings.
3
Connect the camera to the printer using the supplied USB cable.
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an
angle, and do not use force when connecting or disconnecting the USB cable.
4
The camera is automatically turned on.
When properly connected, the
PictBridge startup screen
( 1) will be displayed in the camera monitor, followed by
the
Print selection screen (2).
Print selection
3 2
N O . 3 2
2 0 1 0
1 5 / 1 1
1 2
B
If the PictBridge Startup Screen Is not Displayed
Turn the camera off and disconnect the USB cable. Set the
Charge by computer option (A 136)
in the camera’s setup menu to
Off and reconnect the cable.