Nikon S100 - Manual (Page 196)

E 88
The Setup Menu
Refere
nce S
e
ct
io
n
Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (
A 21) to save power.
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.
Press the shutter-release button to cancel standby mode.
C
Notes on Auto Off
Regardless of the option selected, the monitor will remain on as follows:
• When a setting screen is displayed: three minutes
• During slide show playback: up to 30 minutes
C
Notes on Auto Off When the Camera is Powered by AC Adapter
• When the AC Adapter EH-62G (available separately; E 99) is used, a screen saver function is
activated to prevent screen burn if no operations are performed for the time selected for the Auto
off option (which is fixed to three minutes while a setting screen is displayed). Press the shutter-
release button to reactivate the monitor. If no operations are performed for 30 minutes while the
screen saver is on, the monitor turns off.
• The pictures used for the screen saver are the same as those displayed when l is tapped with
slide show display ( E 62), though no background music is played.
• In the following cases, the monitor turns off without the screen saver function being activated:
- When no operations are performed for 30 minutes with 30 min selected for Auto off, except
when a setting screen is displayed.
- When a slide show lasts for 30 minutes.
• When the camera is connected to a TV or printer, the screen saver function is not activated and the
camera does not enter standby mode even when no operations are performed for an extended
period of time.
d tab M z (setup menu) M k Auto off