PerTronix Dougs Headers D6681 - Manual (Page 4)

Part No. 0110-003111
Page 4 of 4
rev.1 11-19-13DSL
If dipstick tube was removed, make sure it is installed properly and that the dipstick has
been replaced.
Double-check the tightness of all bolts including brackets and accessories.
STARTING THE ENGINE
Start the engine and allow it to warm up to operating temperature. Check for any unusual
noises or exhaust leaks. If every thing is OK, stop the engine and tighten all bolts while
the engine is still warm.
NOTE: Check the bolts periodically to make sure they have not loosened. Re-tighten
after the first 500 miles and then again at 1000 miles.
PARTS LIST
Qty Description
1 Left Side Header
1 Right Side Header
2 Header Gaskets
16 8mm 1.25X30mm Header Bolts
16 Header Star Washers
1 O
2
Sensor Plug
2 O
2
Sensor Extensions
2 2 1/2” Slip Reducers
2 Collector Band Clamps
2 18mm/20mm 1.5 A.I.R. Fittings
1
Doug’s Sticker